|
|
| CISCO Catlyat C3560-48TS Switch |
|
| General |
| Device Type |
Switch |
| Form Factor |
External - 1U |
| Width |
44.5 cm |
| Depth |
30 cm |
| Height |
4.4 cm |
| Networking |
| Ports Qty |
48 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Data Transfer Rate |
100 Mbps |
| Data Link Protocol |
Ethernet, Fast Ethernet |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c |
| Connectivity Technology |
Wired |
| Communication Mode |
Half-duplex, full-duplex |
| MAC Address Table Size |
12K entries |
| Features |
Auto-sensing per device, IP-routing, DHCP support, auto-negotiation, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, manageable, IPv6 support |
| Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s |
| Expansion / Connectivity |
| Interfaces |
48x network Ethernet 10BaseT/100Base TX RJ-45 Y 1 x management - console - RJ-45 |
| Miscellaneous |
| MTBF |
280,900 hour(s) |
| Authentication Method |
Kerberos, RADIUS, TACACS+, Secure Shell v.2 (SSH2) |
| Compliant Standards |
CE, FCC Class A certified, UL, TUV GS, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950 Third Edition, CB, AS/NZ 3548 Class A, FCC Part 15, CSA C22.2 No. 60950-00, MIC |
| Power |
| Power Device |
Power supply - internal |
| Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational: |
65 Watt |
| Environmental Parameters |
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
10 - 85% |
|
|
|
