|
|
| Cisco Catalyst C2960-24TC Switch WS-2960-24TC-L |
|
| General |
| Device Type |
Switch |
| Enclosure Type |
External - 1U |
| Width |
44.5 cm |
| Depth |
23.6 cm |
| Height |
4.4 cm |
| Memory |
| RAM |
64 MB |
| Flash Memory |
32 MB Flash |
| Networking |
| Ports Qty |
24 x Ethernet 10Base-T, Ethernet 100Base-TX |
| Auxiliary Network Ports |
2x10/100/1000Base-T/SFP (mini-GBIC)(uplink) |
| Data Transfer Rate |
100 Mbps |
| Data Link Protocol |
Ethernet, Fast Ethernet |
| Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP |
| Connectivity Technology |
Wired |
| Communication Mode |
Half-duplex, full-duplex |
| Switching Protocol |
Ethernet |
| MAC Address Table Size |
8K entries |
| Features |
Layer 4 switching, Layer 3 switching, Layer 2 switching, IGMP snooping |
| Expansion / Connectivity |
| Interfaces |
24 x network - Ethernet 10Base-T/100Base-TX - RJ-45 2 x network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 |
| Miscellaneous |
| MTBF |
280,271 hour(s) |
| Authentication Method |
Secure Shell v.2 (SSH2) |
| Compliant Standards |
CE, UL, TUV GS, CISPR 24, cUL, EN 60950, EN55022, NOM, VCCI Class A ITE, IEC 60950, EN55024, UL 60950, CISPR 22, FCC Part 15, MIC, AS/NZS 3548 |
| Power |
| Power Device |
Power supply - internal |
| Voltage Required |
AC 120/230 V ( 50/60 Hz ) |
| Power Consumption Operational: |
45 Watt |
| Features |
Redundant Power System (RPS) connector |
| Environmental Parameters |
| Min Operating Temperature |
0 °C |
| Max Operating Temperature |
45 °C |
| Humidity Range Operating |
10 - 85% |
|
|
|
